HP LaserJet 9000 Printer series - Manual (Page 42)

Chapter 2 Printing tasks 42
Selecting the output bin
Selecting an output location
You can select an output location (bin) through your program or printer driver. (Where and how you make
selections depends on your program or printer driver.) If you cannot select an output location from the
program or printer driver, set the default printer output location from the printer control panel.
To select an output location from the control panel
1 Use or to scroll to Configure Device and press .
2 Use or to scroll to Printing and press .
3 Use or to scroll to Paper Destination and press .
4 Use or to scroll to the output bin or device you want and press . Your network administrator may
have changed the name of the device. An asterisk ( * ) appears next to your selection.