HP LaserJet 9000 Printer series - Manual (Page 186)

Appendix B Control panel menus 186
Configure device menu
System setup submenu
Items in this menu affect the printer function. Configure the printer according to your printing needs.
Item Values Explanation
JOB STORAGE LIMIT=32 1 to 100 Specifies the number of jobs that can be stored on the printer hard disk
accessory.
JOB HELD TIMEOUT=
OFF OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK Sets the amount of time that quick copy, proof and hold, private, and
stored jobs are kept before being automatically deleted from the queue.
POWERSAVE TIME=1 HOUR 1 MINUTE
15 MINUTES
30 MINUTES
1 HOUR
2 HOURS
4 HOURS Set how long the printer remains idle before it enters PowerSave mode:
z Minimizes the amount of power consumed by the printer when it is idle.
z Reduces wear on the printer electronic components (Turns off the
display backlight).
z When you send a print job, press a control panel key, open a paper
tray, or open the top cover, the printer automatically exits PowerSave
mode.
Note
PowerSave turns off the backlight on the display, but the display is still
readable.
PERSONALITY=AUTO AUTO
PCL
POSTSCRIPT Select the default printer language (personality). Possible values are
determined by which valid languages are installed in the printer.
Normally you should not change the printer language (the default is AUTO ).
If you change it to a specific printer language, the printer does not
automatically switch from one language to another unless specific
software commands are sent to the printer.