HP LaserJet 9000 Printer series - Manual (Page 187)

Appendix B Control panel menus 187
Configure device menu
CLEARABLE WARNINGS=
JOB ON
JOB Set the amount of time that a clearable warning is displayed on the printer
control panel.
ON : Warning messages display on the control panel until is pressed.
JOB : Warning messages display on the control panel until the end of the
job from which they were generated.
AUTO CONTINUE=ON ON
OFF Determine how the printer reacts to errors.
ON : If an error prevents printing, the message is displayed, and the printer
goes offline for 10 seconds before returning online.
OFF : If an error prevents printing, the message remains on the display,
and the printer does not print until is pressed.
Note
To stop printing when out of staples (when a stapler accessory is
installed), set
AUTO CONTINUE=OFF in the control panel System setup
menu.
CARTRIDGE LOW=
CONTINUE CONTINUE
STOP Determine how the printer functions when toner is low. The CARTRIDGE
LOW message first appears when the print cartridge is almost out of toner.
(About 2,400 pages can still be printed at five percent coverage.)
CONTINUE : The printer continues to print while the CARTRIDGE LOW
message is displayed.
STOP : The printer goes offline and wait for further action.
For more information, see “Managing the print car tridge” on page 76 .
Item Values Explanation