HP LaserJet 9000 Printer series - Manual (Page 188)

Appendix B Control panel menus 188
Configure device menu
JAM RECOVERY=
AUTO AUTO
ON
OFF Determine how the printer functions when a jam occurs.
AUTO : The printer automatically selects the best mode for printer jam
recovery (usually ON ). This is the default setting.
ON : The printer automatically reprints pages after a paper jam is cleared.
OFF : The printer does not reprint pages following a paper jam. Printing
performance might be increased with this setting.
RAM DISK=AUTO AUTO
OFF This item determines how the RAM disk is configured. This item appears
only if there is no optional hard disk installed, and the printer has at least
8 megabytes (MB) of memory.
OFF : The RAM disk is disabled.
Note
If the setting is changed from OFF to AUTO , the printer automatically
reinitializes when it becomes idle.
LANGUAGE=ENGLISH Includes all languages in the list.
When scrolling through the language values, LANGUAGE= should be
updated so it is presented in the highlighted language.
Item Values Explanation