HP LaserJet 9000 Printer series - Manual (Page 45)

Chapter 2 Printing tasks 45
Printing envelopes
To change the fuser levers
1 If an optional output device is installed, slide it away from the
printer to access the left door.
2 Open the left door.
WARNING!
Avoid touching the adjacent fusing area as shown in Step 3. It can
be HOT
.
3 Locate and lift up the two blue “T” shaped levers.
4 Return the fuser levers to the down position after printing an
envelope.
5 Close the left door.
2
5
3
1