HP LaserJet 9000 Printer series - Manual (Page 179)

Appendix B Control panel menus 179
Configure device menu
DEFAULT CUSTOM PAPER
SIZE UNIT OF MEASURE
X DIMENSION
Y DIMENSION Allows the user to set a custom paper size for any of the installed trays.
Substitute the tray number for . This menu only appears when the
selected tray custom switch is in the custom size position. The user
selects the X and Y dimensions of the custom paper size using the
ruler labels in the trays.
PAPER DESTINATION=
STANDARD OUTPUT BIN STANDARD OUTPUT
FACE UP
OPTIONAL BIN Allows the user to configure the output paper bin destination. Only
installed optional bins will appear on the menu.
PAPER DESTINATION=
FACE DOWN BIN FACE UP BIN
FACE DOWN BIN
BOOKLET BIN Indicates where the copies are delivered to the output device.
You can choose the booklet bin only if the multifunction finisher is attached.
DUPLEX=OFF OFF
ON This item appears only when an optional duplex printing accessory is
installed. Set the value to
ON to print on both sides (duplex) or OFF to
print on one side (simplex) of a sheet of paper.
For more information, see the introduce guide on the product CD, or go
to
www.hp.com/cposuppor t/ .
BINDING=LONG EDGE LONG EDGE
SHORT EDGE Allows the user to change the binding edge for duplex printing. The
menu item is displayed when a duplex printing accessory is installed in
the printer and
DUPLEX=ON .
OVERRIDE A4/LETTER=
NO YES
NO This command is used to print on letter-size paper when an A4 job is
sent, but no A4-size paper is loaded in the printer (or to print on
A4-size paper when a letter job is sent, but no letter paper is loaded in
the printer).
Item Values Explanation