HP Deskjet 720c Printer - Manual (Page 38)

27
What If
T HE PRINTER
WON ’ T PICK UP
THE ENVELOPE
If you’re printing a
single envelope
using the single-
envelope slot, you
might not have
pushed the envelope
far enough into the
printer. If you’re print-
ing a stack of enve-
lopes, you might have
included too many in
the stack. Reduce the
number and try
again.
Y OUR ENVELOPES
PRINT LIKE THIS
You might have put
the envelope in
incorrectly. Or you
might not have
selected an envelope
in the
Setup tab of
the HP print settings
box. Or you might
not have made a
special adjustment
required by your word
processor. (See the
word processor
user’s guide for
instructions.)
How to Print a Stack of Envelopes
1 In the HP print settings box, click the Setup tab, then select an
envelope size in the Paper Size box. (See page 9 for how to get to
the HP print settings box.)
2 Slide both of the paper adjusters out.
Make sure the IN drawer is empty.
3 Put a stack of up to 15 envelopes in the printer, as shown below. (If
you’re using thick envelopes, you might need to reduce the number.)
Select an envelope.
Flap side up and the
flap to the left