Rotating to the portrait position – HP LD4210 42-inch LCD Digital Signage Display User Manual
Page 19

4.
After installing the speakers, connect to the SPEAKER input terminal by connecting the proper color
match for the left and right speakers.
Figure 3-11
Connecting to the input terminal
Rotating to the portrait position
When installing the display in the portrait position, rotate it clockwise based on its front. The display
can be rotated in only one direction.
NOTE:
The display cannot be rotated if it is installed on the stand.
Figure 3-12
Installing portrait
NOTE:
The LED indicator light orientation is on the bottom-right corner in the landscape position and
on the bottom-left corner when rotated to the portrait position.
ENWW
Rotating to the portrait position
11
This manual is related to the following products: