Setting up the display, Installing the stand (sold separately), 3 setting up the display – HP LD4210 42-inch LCD Digital Signage Display User Manual
Page 14

3 Setting up the display
To set up the display, ensure that the power is turned off to the display, media player/computer system,
and other attached devices, and then follow the instructions below.
Installing the stand (sold separately)
1.
Take the parts for the stand out of the box.
●
HP LD4201 and LD4210—Four screws M4 x 32 mm (1.26 in) and stand
Figure 3-1
HP LD4201 and LD4210—Stand accessory contents
●
HP LD4710—Four screws M4 x 10 mm (0.39 in) and stand
Figure 3-2
HP LD4710—Stand accessory contents
6
Chapter 3 Setting up the display
ENWW
This manual is related to the following products: