HP 200 Storage Virtualization System - Manual (Page 34)

Error Corrective Action
LUSE volume
A parity group that is administrated in a CLPR
migrated to another CLPR.
The LUSE volume associated to the parity group
administrated in a CLPR is set across multiple CLPRs.
Check the settings, migrate the entire LUSE volume
to the CLPR to which the parity group migrated, if
necessary.
A port in High Speed mode
The port in an SLPR migrated to another SLPR. You are trying to allocate ports in a port block in
High Speed mode to multiple SLPRs. Check the ports'
settings, and ensure that all ports in the port block
belong to the same SLPR.
Name of SLPR
The SLPR name cannot be changed. You cannot assign the same name to multiple SLPRs.
The SLPR name you entered is already used. Enter
another name.
Name of CLPR
The CLPR name cannot be changed. You cannot assign the same name to multiple CLPRs.
The CLPR name you entered is already used or
reserved by a system. Enter another name.
Parity Group
The parity group in a CLPR cannot migrate to another
CLPR.
If you cannot migrate the parity group in a CLPR to
another CLPR.
• The specified parity group is concatenated to
another parity group. The parity groups that
construct the concatenated parity groups must
belong to the same CLPR. Specify all parity groups
that construct the concatenated parity groups.
• If you do not click Apply when creating a new
CLPR, the parity group cannot be allocated. Click
Apply, and migrate the parity group.
NAS port
The NAS ports in an SLPR migrated to another SLPR. NAS ports in the same channel adapter must belong
to the same SLPR. Migrate all NAS ports in the same
channel adapter.
SSID
You cannot migrate SSIDs. You cannot migrate the SSID associated to a CU
group that does not belong to the current CU group.
In this case, migrate the SSID:
1. Use the drop-down list for CU groups in the
upper right of the XP Remote Web Console main
pane to change the CU group to the CU group
the desired SSID is associated to.
2. Delete the SSID you want to migrate.
3. Use the drop-down list for CU groups in the
upper right of the XP Remote Web Console main
pane to switch the CU group to the CU group
the destination SLPR belongs to.
4. Add the SSID.
34 Troubleshooting