HP 200 Storage Virtualization System - Manual (Page 14)

The virtual array created by the partitioned array is referred to as the storage management logical
partition (SLPR). You can create up to 32 SLPRs, including SLPR0 which is provided as a default in one
array (with the exception of the SVS200). For more information, see Creating SLPRs .
Figure 2 Example of an SLPR
To create an SLPR, allocate the array's resources (that is, ports and CLPRs). For instructions on allocating
the array's resources, see Working with SLPRs . To create and manage a CLPR, you need user authority
for the array. For more information, see Partition administration and administrator rights and the
HP StorageWorks XP Remote Web Console user guide for XP12000/XP10000/SVS200.
• Restriction on SLPR and CU group
You cannot allocate array resources belonging to different CU groups to an SLPR other than SLPR0.
NOTE:
If you allocate local array resources belonging to the following CU groups to an SLPR other than
SLPR0, you cannot use the resources:
• CU40-7F
• CU80-BF
• CUC0-FE
Do not allocate resources belonging to these CU groups to an SLPR other than SLPR0.
Partition administration and administrator rights
The following groups of users can access XP Disk/Cache Partition:
• Administrators who have modify access to the full array.
• StorageAdmins who have modify access. This group consists of users who have full array access
and users who have partition-level access.
14 Overview of XP Disk/Cache Partition