HP 200 Storage Virtualization System - Manual (Page 33)

5 Troubleshooting
Table 6 provides general troubleshooting instructions for XP Disk/Cache Partition operations.
Table 6 General troubleshooting for XP Disk/Cache Partition
Error Corrective Action
All XP Disk/Cache Partition functions cannot be
performed.
If you logged on to Command View XP or XP Remote
Web Console as the storage partition administrator
to use XP Disk/Cache Partition, you cannot perform
any functions. To use XP Disk/Cache Partition:
1. Log on as the storage administrator.
2. Contact the storage administrator and have
that person perform XP Disk/Cache Partition
functions.
Port
The specified port cannot be migrated to another
SLPR.
You can migrate only Target ports to another SLPR.
You cannot migrate Initiator, RCU Target, and External
ports. Select a Target port.
Parity group
The parity group administered in a CLPR cannot
migrate to a CLPR in another SLPR.
Only parity groups for open-system user volumes
among parity groups administered in a CLPR can
migrate outside of SLPR0. You cannot migrate parity
groups for mainframe volumes. Select parity groups
that are not for mainframe volumes.
NAS system LU
The parity group administrated in a CLPR cannot
migrate to a CLPR in another SLPR.
Parity groups that contain the NAS system LU
(LUN0005, LUN0006, LUN0008, LUN0009, and
LUN000A) cannot migrate outside of SLPR0. NAS
system LU (LUN0000 and LUN0001) must belong to
the same SLPR as the NAS channel adapter.
Check the NAS system LU's settings, and correct the
settings if necessary. For more information about
changing NAS system LU settings, contact your
HP account support representative.
LU
The parity group administrated in a CLPR migrated to
the CLPR in another SLPR.
• The LU in the parity group administrated in a CLPR
is set across multiple SLPRs.
• The NAS system LU (LUN0000 and LUN0001)
does not belong to the same SLPR as the NAS
channel adapter.
Check the settings, and migrate ports associated to
the LU to the SLPR to which the parity group migrated,
if necessary.
LU
A CLPR in an SLPR migrated to another SLPR or a
CLPR was deleted.
• The LU in the parity group administrated in a CLPR
is set across multiple SLPRs.
• The NAS system LU (LUN0000 and LUN0001)
does not belong to the same SLPR as the NAS
channel adapter.
Check the settings, and migrate ports associated to
the LU to the SLPR to which the parity group migrated,
if necessary.
LU
A port that is administrated in an SLPR migrated to
another SLPR.
The LU associated to the port administrated in an
SLPR is set across multiple SLPRs.
Check the settings, and migrate the parity group
defined to the LU to the CLPR defined to the SLPR to
which the LU migrated, if necessary.
HP StorageWorks 33