HP 200 Storage Virtualization System - Manual (Page 27)

NOTE:
If a customized volume (CV) is set using the Customized Volume function, and the CU number
and SSID are registered to different SLPRs, a dash (-) appears to the right of the SSID. For more
information, see the HP StorageWorks LUN Configuration and Security Manager XP user guide
for the XP12000/XP10000/SVS200.
• From: Starting number of the SSID added to the specified SLPR (0004 to FFFE). You can enter
an SSID that is in SLPR0.
• To: Last number of the SSID added to the specified SLPR (0004 to FFFE). You can enter
up to 256 SSIDs that are in SLPR0.
NOTE:
To add SSIDs to an SLPR, enter the starting number in From, enter the last number in To, and
click Add.
NOTE:
If you add multiple SSIDs to the specified SLPR, the To number must be smaller than the From
number.
NOTE:
To delete an SSID from the SSID box, select the SSID from the SSID box, and click Delete.
NOTE:
If users in the StorageAdmins group who have partition-level access use the Customized Volume
function, first specify the SSID number for the SLPR to prevent overlapping newly allocated SSID
numbers and existing SSID numbers in another SLPR.
• Apply: Applies settings.
NOTE:
You can make changes for more than one CU group before implementing the settings.
• Cancel: Cancels settings entered or selected, and restores settings to their initial values.
Administering SLPRs
Only storage administrators can make settings for SLPR0. A storage partition administrator only has
authority within the assigned storage logical partition. The storage administrator can also assign write
permission for one or more of the following functions:
• Volume Manager
• XP LUN Security Extension
• LUN Manager
• XP Cache LUN
• XP Auto LUN
The following is the general procedure required for preparing and administering the array with SLPRs.
Only Administrators can perform this procedure.
1. Create an SLPR (see Creating SLPRs ).
HP StorageWorks 27