HP Jetdirect 250m Print Server series - Manual (Page 51)

various combinations, supported on these operating systems: Windows (98, 2000, ME, NT 4.0, XP, and
XP 64-bit), MacOS, Novell NetWare, IBM OS/2 Warp, HP-UX, Solaris (on SPARC systems), SCO UNIX,
IBM AIX, and MPE-IX. See the section on
Specifications for details of which operating systems support
which protocols.
The embedded Web server, which allows you to monitor and manage the print server remotely, requires
Microsoft Internet Explorer 5.0 or later, or Netscape Navigator 4.75 or later.
See the Specifications section for more details on the print servers.
Nomenclature
The main parts of the print server are shown in the illustration:
The print server module plugs into the LIO slot of the printer until the latches click into place for a
secure connection. (To unplug the print server, you press the latch release buttons and pull the print
server out of the LIO slot.) The RJ-45 plug on the network cable plugs into the network connector.
When the print server establishes a valid network connection, either the "10" or "100" link light comes
on, to indicate a connection speed of 10 mbps or 100 mbps. The status light shows the health of the
print server (see
Interpreting the lights ). You push the test button to print a configuration page on the
attached printer (see Interpreting the configuration page ).
Package contents
The HP Jetdirect 200m and 250 m products include: