HP StorageWorks 1500cs Modular Smart Array - Manual (Page 28)

Modifying an existing configuration 28
Configuring switches
If the selected controller supports switch configuration, the menu link for this feature is given in the
Wizards panel in the lower right-hand corner of the main ACU configuration screen.
1. Use the
PING
command to confirm that the connections between the management server running
ACU and the LAN management ports on the switches are reliable.
2. Click Switch Configuration (in the Wizards panel).
3. Select the switch that you want to configure, and then click Next.
4. Click ACU Switch Configuration.
5. Set the switch parameters (IP address, default gateway, subnet mask, and community strings), and
then click Finish to save the settings.