HP Integrity NonStop J-Series - Manual (Page 137)

NonStop AutoTMF Commands
HP NonStop AutoTMF Software User’s Guide—429952-016
6-61
HELP
AUTOTMF-COMMANDS
lists all AutoTMF commands available.
autotmf-command [ DETAIL | EXAMPLES ]
an AutoTMF command. Help displays the syntax and description of the command.
Multi-word commands are entered with hyphens.
For example, to obtain help on ADD AUTOTMFFILESET, type:
HELP add-autotmffileset;
DETAIL displays a description of the command parameters in addition to the
syntax.
EXAMPLES displays examples of the command usage.
If DETAIL and EXAMPLES are omitted, HELP displays both as possible subtopics.
MONITOR [monitor-command]
displays the syntax and description of commands that can be sent to the AutoTMF
monitor process via the CI.
monitor-commands is one of: BACKUPCPU, LOG, SECURITY, STATUS or
SWITCH or TRACE.
If monitor-command is omitted, HELP displays a list of the commands as
subtopics.
AUTOTMF-DEFINES
displays the list of DEFINEs for which HELP is available.
define-name [ USAGE ]
the name of the DEFINE. HELP displays the syntax and a description of the
DEFINEs.
USAGE displays information about the usage of the DEFINE.
If USAGE is omitted, HELP displays USAGE as a possible subtopic.
GLOBALS
lists all the possible global parameters that can be set for AutoTMF.
Global parameters are set by the ALTER GLOBAL command.
TRACING
lists tracing options and the commands used to initiate tracing.
Note. If the Monitor process is not running, the output of the HELP command may be
incomplete for certain commands or topics.