HP Integrity NonStop J-Series - Manual (Page 129)

NonStop AutoTMF Commands
HP NonStop AutoTMF Software User’s Guide—429952-016
6-53
CPUS
writes variable length blocked records. Each record is preceded by a one word
indicator that contains the record length in bytes.
Variable length records are word aligned in the output block. The last record in
each block is followed by a terminator ( -1 ) if there is space in the block.
The FOLD and PAD options are not supported when VAROUT is specified.
display-options
Display options differ slightly from FUP display options: output data transformations
(RECOUT, BLOCKOUT, PAD and so on) are applied before formatting the data.
Thus, formatted data is displayed as the data would be written to a disk file.
Entry-sequenced record keys are displayed in the 64-bit format.
[O]CTAL
displays the output in octal and ASCII format.
[D]ECIMAL
displays the output in decimal and ASCII format
[H]EX
displays the output in hexadecimal and ASCII format
[A]SCII
displays the output in ASCII format. This option is ignored if combined with
OCTAL, HEX, DECIMAL or BYTE display options.
NO HEAD
omits the heading preceding each record when one of the display-options is
specified.
CPUS
Displays the CPU configuration of a node.
node-name
a node in the Expand network. The default is the local system.
CREATE MAPDB
Creates a set of SQL tables used to configure AutoTMF and configures the associated
AutoTMF monitor process. See
Monitor Process on page A-2 for guidelines about
managing the monitor process.
CPUS [ node-name ];