HP X1000 Network Storage Systems - Manual (Page 8)

See “ Using the Create a Shared Folder Wiz-
ard ” on page 16.
File sharing services on local storage
See “ Using the Host a SQL Server Database Wiz-
ard ” on page 17.
Microsoft SQL Server 2000 with SP4 or later, SQL
Server 2005 with SP2 or later, and SQL Server
2008*
See “ Using the Host a User-Defined Application Wiz-
ard ” on page 20.
User-defined applications
* ASM does not support SQL Server 2008 databases that utilize FILESTREAM data type storage.
ASM does not support Internet Protocol version 6 (IPv6). When entering or configuring IP address
settings using ASM, use Internet Protocol version 4 (IPv4) addresses.
In order to use some Automated Storage Manager features, your HP Storage System must have
supporting software installed. Microsoft iSCSI Software target is preinstalled. Data Protector Express
and HP StorageWorks Storage Mirroring software are not preinstalled. The following table lists the
supporting software and installation requirements. To obtain software that is not preinstalled on your
HP Storage System, go to
http://www.hp.com/go/storageservers .
Table 2 Required software for ASM features
Preinstalled on X1000
Network Storage Sys-
tems Required for: Software
Yes (license key not re-
quired)
Hosting application storage (Exchange and
SQL Server) and iSCSI-based User-Defined ap-
plication storage
Microsoft iSCSI Software Target
No
Creating backups to tape, other disks, or other
types of storage media
Data Protector Express
No
Replication (SWSM required on replication
source and all replication targets) HP StorageWorks Storage
Mirroring version 5.0.2 or later
Installing the Automated Storage Manager Agent
If you plan to perform data migration tasks for any application servers on your network using the
wizards that are available in the Automated Storage Manager, you must first install the Automated
Storage Manager Agent on those application servers. Follow these instructions before performing
any data migration operations.
Installing the Automated Storage Manager Agent on network application servers
To install the Automated Storage Manager Agent on a network application server:
1. Locate the file at c:\\hpnas\components\allinonestoragemanager\agent.
2. Copy the file to the application server(s) you will use to perform data migration tasks.
3. Run the copied file on each application server to install the Automated Storage Manager Agent.
or
1. On the application server that stores data to be migrated, insert the HP StorageWorks Storage
System Recovery DVD.
Automated Storage Manager 8