HP Officejet Lx All-in-One - Manual (Page 21)

1`3
Before You Start
Before you can use the HP OfficeJet LX, you'll need to do the following:
1. Set up the hardware.
2. Install the software.
3. Optionally, change factory (default) settings (such as the Loaded Paper Size) that
pertain to faxing, printing, and copying.
When You're Ready to Begin
Once you've completed the installation in this chapter, refer to the following chapters
for further information:
N
To change factory (default) settings for the device (using the HP OfficeJet LX
Manager), see chapter 2.
N
To send paper faxes, see chapter 3.
N
To send faxes directly from your PC (using Eclipse FAX SE) or to scan images to PC
files, see chapter 4.
N
To use the HP OfficeJet LX as a printer or as a convenience copier, see chapter 5.
N
For troubleshooting and maintenance, see chapter 7.
N
For reference information, see chapter 8.
1. Installing