HP Lights-Out 100 Remote Management - Manual (Page 5)

Operational overview 5
Operational overview
In this section
Server management.................................................................................................................................. 5
Server management features...................................................................................................................... 5
Server management
The HP ProLiant ML110 Generation 3 Lights-Out 100 Remote Management Processor delivers basic
remote control of vital server resources and supports IPMI 2.0. Throughout this document, you will also
see the term "BMC," which is synonymous with remote management processor.
The ProLiant ML110 G3 Lights-Out 100 Remote Management Processor provides system administrators
with access to the server at any time, even before an operating system is installed on the server. This
remote management processor provides a text mode console redirection, IPMI CLP, and browser access to
many of the same IPMI functions. You can access the remote management processor and the management
features of the HP ProLiant ML110 G3 Server through a dedicated Ethernet port over a TCP/IP
management port or the integrated serial port.
Server management features
With the ProLiant ML110 G3 Lights-Out 100 Remote Management Processor, you can:
• Switch between console redirection and the command line using either the dedicated management
or serial port
• Communicate securely using SSL and SSH
• Remotely power on and off the server
• Perform warm or cold server reboots
• Reboot the server to a virtual floppy
• Remotely monitor server state voltage, fan speed, and system state (S0 or S5)
• Access the System Event Log
• Configure TCP/IP settings for the NIC
• Change user password
• Access the BMC and server controls using a standard browser or new industry standard SMASH CLP
command line interface
• Access command line help
• Manage the server with IPMI 2.0 compliant applications