HP Lights-Out 100 Remote Management - Manual (Page 26)

Using Integrated Lights-Out 100 26
this guide. The server continues to reboot to the virtual floppy until the virtual floppy is disabled on the
ProLiant ML110 G3 Server as follows:
1. Ensure the target server is configured for network access. Follow the instructions in the "Additional
network settings (on page
27 )" section of this guide.
2. On the target server, press the F10 key during POST to enter BIOS setup, and navigate to I/O
Device Configuration under the Advanced window. Press the Enter key.
3. In the BIOS Setup Utility, press the right arrow (→) key to navigate to the Advanced menu.
4. Press the down arrow (↓) key to scroll to IPMI. Press the Enter key.
5. Press the down arrow (↓) key to scroll to USI and VSI configuration. Press the Enter key.
6. Press the down arrow (↓) key to scroll to Virtual Floppy, and set it to Disabled.
7. Press the F10 key to save the changes and exit Setup.
User administration
The user password is stored in nonvolatile memory and can be changed through a Web browser
("
Changing the password through a Web browser " on page 26 ) or the CLP (" Changing the password
through the CLP " on page 27 ).
Changing the password through a Web browser
1. Click Administration on the main menu navigation bar.
2. Enter the password in the Password and Confirm Password fields.
3. Select the User Privilege level from the dropdown menu.
4. Change the user name if needed.
5. Click the Set button to save the changes.