HP Photosmart C8180 All-in-One Printer - Manual (Page 62)

To remove the lid
1. Lift the lid to the open position, grasp the sides of the lid, and then pull the lid upwards
until it comes off.
Do not unplug the Slide and Negative Film light power cord. It should stay connected
to the back of the HP All-in-One.
2. Place the lid over the oversized original while you are copying or scanning.
3. When you finish copying or scanning, replace the lid by inserting the tabs on the lid
back into the appropriate slots of the HP All-in-One.
Choose papers for printing and copying
You can use different types and sizes of paper in the HP All-in-One. Review the following
recommendations to get the best printing and copying quality. Whenever you change
paper types or sizes, remember to change those settings.
This section contains the following topics:
• Recommended papers for printing and copying
• Recommended papers/media for printing only
• Papers to avoid
Recommended papers for printing and copying
If you want the best print quality, HP recommends using HP papers that are specifically
designed for the type of project you are printing. If you are printing photos, for example,
load HP Premium or HP Premium Plus photo paper in the input tray.
Choose papers for printing and copying 61
Loa
d
o
rig
in
als and load
paper