Access the embedded web server, Use the embedded web server setup wizard – HP Photosmart C8180 All-in-One Printer User Manual
Page 46
Access the Embedded Web Server
The computer you use to access the Embedded Web Server on the HP All-in-One must
be connected to the same network as the HP All-in-One.
To access the Embedded Web Server
1.
Print a network configuration page to find the IP address for the HP All-in-One.
2.
In the Address box in your Web browser on your computer, type the IP address of
the HP All-in-One, as shown on the network settings page. For example, http://
192.168.1.101.
The Embedded Web Server Home page appears, showing information for the HP All-
in-One.
NOTE:
If you are using a proxy server in your browser, you might need to disable
it to access the Embedded Web Server.
3.
If you need to change the language displayed in the Embedded Web Server, do the
following:
a. Click the Settings tab.
b. Click Select Language in the Settings navigation menu.
c. In the Select Language list, click the appropriate language.
d. Click Apply.
4.
Click the Home tab to access device and network information, or click the
Networking tab to access more network information or to modify network information.
5.
Make any configuration changes.
6.
Close the Embedded Web Server.
Related topics
“View and print network settings” on page 41
Use the Embedded Web Server setup wizard
The network setup wizard provided in the Embedded Web Server gives you an intuitive
interface to your network connection parameters.
To access the Embedded Web Server setup wizard
1.
Print a network configuration page to find the IP address for the HP All-in-One.
2.
In the Address box in your Web browser on your computer, type the IP address of
the HP All-in-One, as shown on the network settings page. For example, http://
192.168.1.101.
The Embedded Web Server Home page appears, showing information for the HP All-
in-One.
NOTE:
If you are using a proxy server in your browser, you might need to disable
it to access the Embedded Web Server.
3.
Click the Networking tab.
4.
Click Wired (802.3) or Wireless (802.11) in the Connections navigation menu.
5.
Click Start Wizard, and then follow all of the wizard instructions.
Connect to a network
45
Finish
set
up