Memory card and front usb port troubleshooting, Ra, or storage device, see, Memory card and front – HP Photosmart C8180 All-in-One Printer User Manual
Page 180

A blank page came out while printing
Cause: The document you are printing contains an additional blank page.
Solution: Open the document file in your software application and remove any extra
pages or lines at the end of the document.
Cause: The HP All-in-One picked up two sheets of paper.
Solution: If the HP All-in-One has only a few sheets remaining, load more paper in
the input tray. If there is plenty of paper in the input tray, remove the paper, tap the
stack of paper against a flat surface, and reload the paper into the input tray.
For more information, see:
Ink is spraying the inside of the HP All-in-One when I print a photo
Cause: The borderless print settings require photo paper to be loaded in the input
tray. You are using the wrong paper type.
Solution: Make sure you load photo paper in the input tray before you print a
borderless print job.
Memory card and front USB port troubleshooting
Use this section to solve these memory card and front USB port problems:
•
My memory card no longer works in my digital camera
•
The HP All-in-One does not read the memory card or storage device
•
The Photo light next to the memory card slots is blinking
•
The Attention light blinks when I insert my memory card or storage device
•
The photos on the memory card or storage device do not transfer to my computer
•
Memory card or storage device is not available
•
Photos in a connected digital camera with PictBridge do not print
•
The file name appears as meaningless text
•
Other users on the network can access my memory card or storage device
•
Error message: Cannot find the file or item. Make sure the path and file name are
correct.
My memory card no longer works in my digital camera
Cause: You formatted the card on a Windows XP computer. By default, Windows
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.
Solution: Reformat your memory card in your camera or format your memory card
in a Windows XP computer by selecting the FAT format.
Memory card and front USB port troubleshooting
179
Trou
bles
ho
ot
ing