HP Integrity rx2800 i2 Server - Manual (Page 18)

Introduction 18
HP SUM stores host and group information from session to session. However, user names, passwords, and
existing credentials are not stored in a session or from session to session.
Use OA version 2.51 or later to get a list of all major firmware versions deployed in your enclosure, using the
Rack Firmware link on the main OA web page. HP supports the current and two previous versions of the HP
Smart Update Firmware DVD.
NOTE: The Onboard Administrator and Virtual Connect Ethernet and Fibre Channel Modules
are supported only in online deployments on HP ProLiant servers.
NOTE: You can add firmware components to the USB drive key in the /hp/swpackages
directory.
IMPORTANT: Before deploying firmware updates to a target server, be sure that a recent backup
of the target server is available in the event the deployment procedure fails.
For more information about deploying firmware on HP ProLiant servers, see the HP Smart Update Firmware
DVD User Guide on the HP website
( http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManu
al&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=345557 ).
NOTE: Currently, HP SUM cannot be used to deploy firmware on HP Integrity servers except for
HP Integrity BL860c/BL870c/BL890c i2 Servers.
HP SUM supported firmware for HP ProLiant servers
Component Supported
HP ProLiant ML/DL/SL series System ROM Yes
HP Workstation WS460c G6 Blade ROM Yes, offline only
HP ProLiant Blade Servers ROM Yes
HP ProLiant 100-series Servers ROM Yes
iLO 2 firmware
Yes, local and remote
iLO 3 firmware 3
Yes, local and remote
LO-100 firmware 3 Yes
Broadcom NIC firmware Yes
Intel® NIC firmware No
QLogic NIC firmware Yes, offline only
Mellanox NIC firmware Yes
Power Management Controller firmware Yes
Smart Array Controller firmware Yes
SAS and SATA hard drive firmware behind Smart Array controllers Yes
SAS and SATA hard drive firmware behind non-Smart Array
controllers
No