HP Integrity rx2800 i2 Server - Manual (Page 11)

Introduction 11
For RHEL 6 installations, you must perform the following:
a. Select Basic Server.
b. Select Customize Now.
c. Under Base System, select the following libraries:
— Compatibility libraries
d. Under Hardware Monitoring Utilities, select lm_sensor-3.1.1-10.el6-
e. Under Systems Management, select SNMP Support.
f. Under Desktops, select the following:
— XWindows System
— Legacy XWindows System Compatibility
— Either Gnome or KDE Desktop.
g. Under Development, perform the following:
i. Select Development Tools, and then select expect-5.44.1.15-2.el6..
ii. Select Server Platform Development.
o For SLES 10 x86 servers
— compat-2006.1.25-11.2.i586 or later
— compat-libstdc++-5.0.7-22.2.i586 or later
— perl (required to provide the libperl.so)
— libnl (required for QLogic and Emulex drivers)
o For SLES 10 AMD64/EM64T servers
— compat-2006.1.25-11.2.x86_64 or later
— compat-32bit-2006.1.25-11.2.x86_64 or later
— compat-libstdc++-5.0.7-22.2.x86_64 or later
— perl (required to provide the libperl.so)
— libnl (required for QLogic and Emulex drivers)
— e2fsprogs-32bit
o For SLES 11 x86 servers
— perl (required to provide the libperl.so)
— libstdc++33-3.3.3-11.9.i586 or later
— perl-SNMP-5.4.2.1-6.3.i586 or later
— net-snmp-5.4.2.1-6.3.i586 or later
— libnl (required for QLogic and Emulex drivers)
o For SLES 11 AMD64/EM64T servers
— glib-1.2.10-15.i386 or later
— libstdc++33-32bit-3.3.3-11.9 or later
— perl-SNMP-5.4.2.1-6-3.x86_64 or later
— net-snmp-5.4.2.1-6.3.x86_64 or later