HP Integrity rx2800 i2 Server - Manual (Page 103)

Troubleshooting 103
Recovering from a blocked program on Microsoft
Windows
Configuring Windows firewall settings
The Windows® Security Alert appears when a program is blocked from accepting connections from the
Internet or a network.
To set the rules for the Windows® Firewall and Security Policy, click Unblock, and then set your firewall
settings to the following:
1. Click Start>Control Panel>Administrative Tools>Windows Firewall with Advanced Security>Inbound
Rules>Remote Administration (NP-IN).
2. Select Enabled, and then select Allow the connections.
For Direct to iLO support, you must enable ping.
Enabling ports in HP Smart Update Manager
The ports that HP Smart Update Manager uses cannot be configured. When HP Smart Update Manager port
initiates communications to remote targets, it uses several well-known ports depending on the operating
system. For Windows®, it uses ports 138 and 445 to connect to remote targets (equivalent to remote and file
print share functionality). For Linux, HP Smart Update Manager uses port 22 (SSH) to start the
communications with the remote target.
HP Smart Update Manager uses defined ports to communicate between the remote target and the
workstation where HP Smart Update Manager is executing. When you run HP Smart Update Manager, it
uses the administrator/root privileges to dynamically register the port with the default Windows® and Linux
firewalls for the length of the application execution, then closes and deregisters the port. All communications
are over a SOAP server using SSL with additional functionality to prevent man-in-the-middle, packet spoofing,
packet replay, and other attacks. The randomness of the port helps prevent port scanning software from