HP Integrity rx2800 i2 Server - Manual (Page 47)

HP SUM User Interface 47
screen appears while HP SUM builds an inventory of available updates. When the inventory process is
complete, the Select Installation Host(s) screen appears.
Selecting remote hosts or groups
The Select Installation Host(s) screen enables you to choose multiple hosts and groups for component
installation. A remote host can be the IP address or DNS name of a remote server, remote iLO NIC port,
Virtual Connect Ethernet or Fibre Channel Module for c-Class BladeSystem, BladeSystem Onboard
Administrator, or 3 Gb SAS BL Switch firmware.
To search for remote hosts, see "Searching for remote hosts (on page 48 )." To add hosts, see "Managing
hosts (on page 48 )." To add groups, see "Managing groups (on page 52 )."
To continue with the deployment process:
1. Select one or more hosts or groups.
2. To continue, click Next.
3. Enter the credentials for the host (" Entering credentials for hosts " on page 55 ).
4. Click OK to proceed, as described in Selecting components to install on multiple hosts (on page 60 ).
5. When the installation is complete, the Installations results for multiple hosts screen (" Viewing the
installation results for multiple hosts " on page 64 ) appears.
NOTE: When running on a Linux system and the expect-5.x package is not installed, HP
SUM displays a pop up error message reporting that the package is missing and you are not able
to deploy to remote systems. However, you can still deploy to the local host. To perform a remote