HP Integrity rx2800 i2 Server - Manual (Page 49)

HP SUM User Interface 49
• BladeSystem Onboard Administrator
• Interconnect switch - 3 GB SAS BL Switch
NOTE: Local hosts cannot be included in a list with remote hosts or in a group. When selecting
iLO and iLO 2 for ProLiant, iLO 3 for Integrity, OA, VC, or 3 Gb SAS BL Switch as a target, only
the firmware component for that particular hardware can be updated. The server host must be
selected to update all other firmware and software components. The iLO firmware can be
updated by either selecting the iLO version or the server host.
NOTE: An LO-100 BMC IP cannot be used as a target to update the LO-100 firmware directly.
If used, the following pop-up message displays: Could not contact host. You can only
update the LO-100 firmware when updating firmware on a 100-series server.
To add a host: