HP Integrity NonStop H-Series - Manual (Page 51)

Configuring the MLMM Server on the NonStop
System
Mid-Range Library Media Manager Installation and User’s Guide — 541641-001
3- 21
Testing Communication Between the NonStop
Server and the Tape Library
Testing Communication Between the NonStop Server and the
Tape Library
Example 1
1. Log on as SUPER.SUPER at the TACL prompt where MLMM is installed.
2. Volume over to the location where the Server files were transferred.
3. Type RUN TPTSTR and the SCSI name of the tape library (in this example the
SCSI name is $SL500) at the TACL prompt (See Figure 3-21 ).
Note. There are two ways to test communication by running TPTSTR. (See the next
examples.)
Note. TPTSTR is a test to see if the tape library is communicating with the server.
Figure 3-21. RUN TPTSTR