HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 63)

EN
Loading media 63
3 Place the bundle of envelopes with
the front side placed face up in
Tray 1. Confirm that the flaps of the
envelopes are placed on the left side
(facing the side of the front cover) of
the tray.
The media size selection screen
appears automatically in the touch panel
display.
Note
Up to 10 envelopes can be placed in the
stack bypass. Make sure that the height
of the media stack does not exceed the
media-fill mark at the back of the tray.
4 Adjust the media-width guides to fit
the size of the envelopes.
! You cannot copy onto the back side
of envelopes (the side with the flap).
If you use top-flap envelopes, place
the flap toward the copy module.
! If you use ISO-B5 envelopes, place
them so that the flap is firmly folded
down and facing downwards in the
tray.
Note
Align the envelopes properly with the
media-width guides. If envelopes are
loaded too loosely or tightly in Tray 1,
media jams or misalignment may occur.
4
3