HP Color LaserJet 8550 Multifunction Printer series User Manual

Page 297

Self-diagnostic messages 297

Note

For more information about control panel error messages, see
Chapter 7 of the HP Color LaserJet 8550, 8550N, 8550DN, 8550GN,
8550MFP Printer User Guide.

** (COLOR) TONER NEEDS TO BE

REPLACED.

There is a small amount of the toner
remaining as indicated in the touch
panel display.

Prepare the required toner cartridge
indicated in the touch panel display.

REPLACE ** (COLOR) TONER

CARTRIDGE.

There is only a small amount of the
toner remaining as indicated in the
touch panel display, halting any print or
copy jobs.

Replace the required toner cartridge
indicated in the copy module touch
panel display.

LOAD PAPER.

The copy module has run out of media,
halting any print or copy jobs.

Load media in one of the input trays.

See “Loading media” on page 60

LOAD **-SIZE PAPER.

Copy media of the appropriate size and
rotation is not placed in the selected
media input tray.

Place copy media of the indicated size
and rotation in the input tray.

When the

TART

key is pressed with this

message displayed, copying will be
performed on the displayed copy media
size.

See “Selecting the copy media size” on
page 65.

ADJUSTING...
WAIT A MOMENT, THEN SET THE

STACK BYPASS SIZE AGAIN

The copy module is presently making
internal operational adjustments.

Remove the media placed in Tray 1
(stack bypass), wait 1 minute, and then
replace the media in the tray.

See “Loading media in Tray 1 (stack
bypass)” on page 61.

Self-diagnostic (error) messages (continued)

Message/cause

Remedy