HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 185)

EN
Slanting images 185
4 Designate the angle using
̇
or
̈
.
Select
FRAMING
to make copies of a
designated area on the original. This
allows you to specify what part of the
original to use for the slanted image.
See the instructions on page 165 for
making the framing selection.
After the framing selection has been
made, or if
FRAMING
is not being
used, press
OK
and proceed to
step 5.
Note
The relationship between the orientation
of the original image and the slanted
image is represented by the “R” in the
touch panel display.
If the Slanted Image setting causes a
part of the image to fall outside of the
copy media area, only the part that is
within the media area is copied; the rest
of the image is lost.
5 Press
DONE
on the screen pictured
here, and on the subsequent screen
(not pictured). Then press
S TART to
make copies.
4
5