HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 166)

166 Chapter 5 Image manipulation
EN
4 Select
AREA 2
if you wish to
designate a second area. Repeat the
procedure described in Step 3.
Designate Area 3 and Area 4 in the
same way. Select
FRAMING
, and then
press
OK
.
Note
You can designate up to four separate
image areas.
5 Select
YES
or
NO
to shift the
designated area to the center of the
copy, then press
OK
. Place your
original on the glass. Press
DONE
,
and then press S TART to make
copies.
Note
Match the orientation of the original on
the glass with the coordinates you
entered.
4
5