HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 54)

54 Chapter 2 Basic copy module functions
EN
To set Automatic Start
1 Place your original on the glass or in the optional ADF, and then
enter the desired copy settings.
2 Press S TART to make copies.
3 This following message appears:
COPYING WILL BEGIN WHEN
WARMED UP
.
4 When the copy module is ready, copying will begin automatically.
Note To cancel Automatic Start, press S TOP or R ESET . Automatic Start will
be canceled automatically when the cover of the copy module is
opened.
You cannot use the Interrupt mode with Automatic Start.