HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 113)

EN
Making double-sided copies 113
Using 2
̈
2-SIDED mode
With this mode, you can create double-sided copies from
doubled-sided originals.
Note You can use the 2
̈
2-SIDED mode only when the optional ADF is
installed.
Double-sided originals are automatically flipped over in the optional
ADF to make double-sided copies.
Figure 23 Create a double-sided copy from a double-sided original
When your are ready to make copies in the 2
̈
2-SIDED mode on
Ledger-sized media (64 g/m
2
or 17-lb bond), wait more than 30
minutes after the power switch has been turned on before
proceeding.
Note For more information on making double-sided copies using Tray 1
(stack bypass), see “Selecting copy media size using Tray 1 for
double-sided copies” on page 71.
Original Copy