HP LaserJet 3100 All-in-One Printer series - Manual (Page 41)

40 1 Set Up EN
Setting required features for standalone fax
Certain settings must be determined before using the HP LaserJet
3100 product as a fax machine. If you have installed the software,
you already set these features, and you can go to the next section.
If you do not intend to install the software, you need to do the
following:
❏
Set the correct time and date.
❏
Enter the fax header information. Filling it in is a legal
requirement. Most HP LaserJet 3100 product functions are not
available until it is filled in.
❏
Check the answer mode and number of rings-to-answer settings.
Depending on your configuration, you may or may not have to
alter these settings.
See the following pages for instructions on altering or checking these
settings. For information on other settings, such as programming a
Mercury button or changing from tone to pulse dialing, see chapter 8,
“Managing Basic Features.”