HP LaserJet 3100 All-in-One Printer series - Manual (Page 159)

158 8 Managing Basic Features EN
Turning on or off error correction
Normally, the HP LaserJet 3100 product monitors the signals on the
telephone line while it is sending a fax, which it sends in pieces. If the
HP LaserJet 3100 product detects an error signal while it is sending a
piece of the fax, it can resend that piece.
The factory default for this setting is On. Only change it to Off if you
are having trouble sending or receiving a fax and want to accept the
errors in the transmission. Then, return the setting to On when you
have finished.
To turn on or off error correction
1 Press E NTER /M ENU .
2 Use the < and > keys to select Fax Settings and press
E NTER /M ENU .
3 Use the < and > keys to select All Faxes and press
E NTER /M ENU .
4 Press E NTER /M ENU to select Error Correction .
5 Use the < and > keys to select On or Off and press E NTER /M ENU .
6 Press S TOP /C LEAR to exit the Menu settings.