HP Workstation xw8000 - Manual (Page 88)

4-22
Adaptec SCSI RAID 2120S/2200S Software User’s Guide
container create stripe [/cache{=boolean}]
[/stripe_size{=integer}] [/label{=string}]
{free_space} [{scsi_device}...]
Creates a RAID 0 (stripe).
Parameters
{free_space}—SCSI device and its associated available
space to use to create the RAID 0.
{scsi_devices}...—One or more SCSI devices.
Switches
/cache—Specifies whether to enable the array’s raw cache
mode.
/stripe_size—Stripe size for the RAID 0. Defaults to
64 KB.
/label—Label to assign to the new RAID 0.
container create volume [/cache{=boolean}]
[/label{=string}] {scsi_device}, {free_space},
{scsi_device}, [{free_space}...]
Creates a volume.
Parameters
{scsi_device}—SCSI device and its associated available
space to use to create the volume.
{free_space}—Available space to use to create the
volume.
{scsi_device}, {free_space}...—Additional SCSI
devices and associated available spaces.
Switches
/cache—Enables the array’s raw array cache.
/label—Label to assign to the new volume.
UG.book Page 22 Saturday, October 26, 2002 12:08 PM