HP Workstation xw8000 - Manual (Page 70)

4-4
Adaptec SCSI RAID 2120S/2200S Software User’s Guide
Using the CLI
Brief descriptions of many of the CLI commands are provided later
in this chapter.
This section contains some examples of using CLI commands to
perform common tasks.
■ Opening and Closing a Controller
■ Creating Single-Level Arrays
■ Deleting Arrays
■ Enabling Spares
■ Displaying Controller Information
■ Displaying Disk Information
■ Displaying Array Information
Opening and Closing a Controller
Before any command can be sent to a specific controller that
controller must first be opened. Only one controller may be open at
any time.
To open controller AAC0 use the following command.
CLI> open AAC0
When you have finished with the controller close it with the
following command.
AAC0> close
Creating Single-Level Arrays
This section explains how to create and work with single-level
arrays. The RAID software supports four types of single-level
containers:
■ Volume
■ RAID 0
■ RAID 1
■ RAID 5
UG.book Page 4 Saturday, October 26, 2002 12:08 PM