Degraded, Consistency check command, Dirty data – HP Workstation xw8000 User Manual

Page 114

A-4

Glossary

consistency check command

Command that reads all the blocks of a RAID 1 or RAID 5 to
determine if the blocks are consistent. If any inconsistent blocks are
detected, they are fixed.

container

See

array

. Container is another term for array used in the Adaptec

SCSI RAID Software Reference Guide.

dead partition

See

failed

dedicated hot spare

Component that can take the place of a failed component only on
the fault-tolerant array to which it is explicitly assigned.

degraded

A redundant array in which one or more members have failed such
that data is intact but redundancy has been compromised is in the
degraded state. The array and all data on it is accessible but a
further drive failure would cause the array to fail and result in data
loss.

dirty data

Data that has been written to a

cache

but which has not been

“flushed” out to its final destination.

disk

Physical disk drive. Randomly accessible, re-writable data storage
device. Also called hard disk.

disk ID

Unique disk identifier that consists of the channel number, SCSI ID
(target ID), and LUN. For example, (channel:ID:LUN) 1:04:0. See
also

channel

;

LUN