HP Workstation xw8000 - Manual (Page 20)

2-4
Adaptec SCSI RAID 2120S/2200S Software User’s Guide
■ You cannot make a non-00 array bootable if the array is in a
build/verify or reconfiguration process.
Caution: The controller always uses the lowest numbered
array as its bootable array. If you delete array 00 for any
reason, the next lowest numbered array will become the
bootable array. Use the Ctrl+B option to mark the correct
array as the bootable array (by making it array 00).
If you want to boot from a stand-alone (single) disk drive, first
create a volume on that disk.
The system BIOS provides additional tools to modify the boot
order. For more information, refer to your system documentation.
Deleting Arrays
Caution: Back up the data on an array before you delete it. All
data on the array is lost when you delete the array. Deleted
arrays cannot be restored.
To delete an existing array:
1 At the BIOS prompt, press Ctrl+A.
2 From the ARC menu, select Array Configuration Utility.
3 From the ACU menu, select Manage Arrays.
4 Select the array you wish to delete and press Delete.
5 In the Array Properties dialog box, press Delete again and
press Enter. The following prompt is displayed:
Warning!! Deleting will erase all data from the
array.
Do you still want to continue? (Yes/No):
6 Press Yes to delete the array or No to return to the previous
menu. At the Array Properties dialog box, select Delete again
and press Enter.
7 Press Esc to return to the previous menu.
!
!
UG.book Page 4 Saturday, October 26, 2002 12:08 PM