HP Workstation xw8000 - Manual (Page 37)

3-5
Adaptec Storage Manager-Browser Edition
To login from any system with a web browser:
1 Start the web browser application and type the IP address for
the system you want to access in the address bar and press
Enter
. Example: https://10.6.3.14:3513/adaptec.
When connection to the remote system is established the
Adaptec Storage Manager Login screen will appear.
Note: If you are using a proxy server to access the internet,
you will need to bypass the proxy server to access the
Adaptec Storage Manager web server. In IE, if you know
the IP address of the system you want to manage
remotely, choose Tools > Internet Options >
Connections>LAN Settings >
select Use a proxy server
for your LAN >Advanced , and type the managed
system’s IP address in the Exceptions section.
In Netscape, if you know the IP address of the system you
want to manage remotely, choose Edit> Preferences >
Advanced> Proxies > Manual proxy configuration > No
Proxy For
, type the managed system’s IP address.
2 Enter the host name or IP address of the system you want to
manage and the administrative username and password that
you would normally use to log into that system.
3 Click Login.
Note: When you run Adaptec Storage Manager for the first
time after installation you will have to install a security
certificate. For instructions, see
Installing a Security Certificate
on page 3-6 .
UG.book Page 5 Saturday, October 26, 2002 12:08 PM