HP Workstation xw8000 - Manual (Page 56)

3-24
Adaptec SCSI RAID 2120S/2200S Software User’s Guide
■ Revision— The version number information stored on the
device.
■ Data Rate— The data transfer speed negotiated between the
controller and this device.
■ SCSI ID, LUN— For devices on a SCSI channel the SCSI ID and
LUN of the device are reported. These do not apply for ATA
and Serial ATA devices and will always return 0.
Capacity Tab
The Capacity tab appears only for disk drives and when selected,
displays a summary view listing the reserved, used, available, and
total capacities of the drive.
The capacities are reported in both the number of 512-byte blocks
(shown in both decimal and hexadecimal values) and capacity in
kilobytes, megabytes, or gigabytes.
Selecting the detailed option shows information for all segments on
the drive. In this view, the following information is displayed for
each segment:
■ Number of the segment
■ Start and end blocks
■ Segment size and type
Type indicates how the segment is used. The first and last
segments are always reserved. The beginning of the drive is where
the controller stores the RAID signature. The end of the drive is
where the capacity is rounded down to the nearest 100 MB.
If this segment is a component of an array, type indicates the array
level the segment is used in. If the segment is not used in an array,
and is not a reserved area, it will be shown as available.
Detailed view defaults to displaying the numbers of the start and
end blocks of each segment in decimal values. A drop-down list is
provided to allow you to display these numbers in either
hexadecimal or capacity.
UG.book Page 24 Saturday, October 26, 2002 12:08 PM