HP Remote Insight Lights-Out Edition II Board - Manual (Page 63)

Using the software 63
• IDE Status (status reported by the IDE MIB)
HP Insight Information for servers
The Insight Information option provides quick access to some of the information provided by the HP Insight
Management Agents for servers. This option is not intended to provide all the information from the
Management Agents. Complete information is available through the Web agents.
NOTE: Load the HP MIBs for HP ProLiant servers to obtain the most useful information. If the
MIBs are not loaded into NNM, then instead of receiving status of other, ok, degraded, or
failed, you will receive status of 0, 1, 2, or 3. The MIBs are installed with the Insight
Integration by default. See "Loading the HP MIBs (on page
60 )" and "Unloading the HP MIBs
(on page 61 )" for full implementation procedures.
If a requested option is not supported by the selected system, you will receive a message similar to the
following: "Note: requested information is not available from hostname."