HP Integrity rx4640 Server - Manual (Page 26)

Installation Overview
HP Smart Array 5300 Controller User Guide 2-5
HP CONFIDENTIAL
Writer: Kimberly Koch File Name: c-ch2 installation overview.doc
Codename: SilverHammer Part Number: 135606-006 Last Saved On: 3/13/03 1:53 PM
Procedure for a Preconfigured System
1
Back up data (required if migrating
from a non-array controller).
- - - - - 2
Update the system firmware
(Chapter 4).
:
3
If the controller is to be the boot
device, install the device driver for
your operating system (Chapter 7).
Otherwise, continue with step 4.
:
5 Set the controller order (Chapter 5). - - - - - 4
Install the controller hardware
(Chapter 3).
:
6
Update the controller firmware
(Chapter 4).
:
7
If using the System Configuration
Utility, update the system partition
(Chapter 4), and then check the
controller order (Chapter 5).
- - - - - 8
If the controller is not to be the boot
device, install the device driver for
your operating system (Chapter 7).
:
9
Update Insight Manager Agents if
new versions are available
(Chapter 7).
:
11
If migrating from a non-array
controller, restore data from backup.
- - - - - 10
Create and format logical drives as
desired (Chapter 6).
Figure 2-4: Controller installation in a preconfigured
system