HP Integrity rx4640 Server - Manual (Page 24)

Installation Overview
Procedure for a New, Non-autoconfigurable System
ProLiant Servers
1
Install the controller
hardware (Chapter 3), if
it is not pre-installed.
. . . . . . . 2
Update the system
firmware (Chapter 4).
:
3
Update the controller
firmware (Chapter 4).
:
5
Set the boot controller
(Chapter 5).
. . . . . . . 4
Configure the system
(Chapter 5).
:
6
Create at least one
logical drive and format
it (Chapter 6).
:
7
Install the operating
system and device
drivers (Chapter 7).
. . . . . . . 8
Create and format
additional logical drives
if desired (Chapter 6).
Figure 2-2: Controller installation in a new, non-autoconfigurable system
HP Smart Array 5300 Controller User Guide 2-3
HP CONFIDENTIAL
Writer: Kimberly Koch File Name: c-ch2 installation overview.doc
Codename: SilverHammer Part Number: 135606-006 Last Saved On: 3/13/03 1:53 PM