HP Integrity rx4640 Server - Manual (Page 106)

Index
rebuild SCSI
description of E-5 cable connectors, illustrated 3-5
time required for E-6 Low Voltage Differential (LVD) 1-8
recharging batteries 1-7 ports, on board, illustrated 1-2
recovering data, general information E-5 standards supported 1-8
Recovery ROM 1-10 SCSI bus
regulatory compliance notices A-1 termination of C-1, E-1
replacing transfer rate of C-1
adapter board 8-8 SCSI devices, compatibility of 1-8
array accelerator 8-1 SCSI IDs, setting 3-3
batteries 8-4 SCSI ports
cache 8-1 location of, illustrated 1-2
existing controller 3-2 restrictions on use of 1-2, 3-6
hard drive E-7, E-8 SCSI tape drives, support for 1-4
Smart controller, restriction on 3-4 SCSI termination requirement 3-4
replication of array configuration 6-1 sector repair, dynamic 1-9
resources series number for regulatory
compliance A-1 Array Diagnostic Utility E-4
automatic data recovery E-5
Server Diagnostics utility G-1
Insight Manager 1-10 size of cache 1-6
restrictions on Smart Components, source of 4-1
ACU use 6-2 SmartStart Scripting Toolkit 6-1
controller port use 3-6 SmartStart software 4-1
CPQONLIN use 6-2 spare drives
hard drive types supported E-1 defined D-5
moving drives E-9 support for 1-4
number of hard drives per port C-1 static-safe containers B-1
ORCA use 6-2 status LEDs, on drives E-2
replacing a Smart controller 3-4 striping data, defined D-2
ROM summary
Recovery 1-10 of controller features 1-4
ROM, updating 4-1 of fault management features 1-8
of RAID methods D-10
supported S
hard drives, features of E-1
S.M.A.R.T. support 1-4, 1-9
number of hard drives per channel E-1
SAN Access Module, support for 1-4
number of hard drives per port C-1
number of logical drives per array 6-2
Index-6 HP Smart Array 5300 Controller User Guide
HP CONFIDENTIAL
Writer: Kimberly Koch File Name: x-index.doc
Codename: Silver Hammer Part Number: 135606-006 Last Saved On: 3/13/03 2:04 PM