HP Integrity rx4640 Server - Manual (Page 104)

Index
protection against D-4 interim data recovery
recognizing E-2 description of 1-9
replacing drive after E-7 limitation of D-11
upon replacement, possible cause E-7 internal cabling 3-4
hard drives internal connectors on board 1-2
adding, to array E-11
assigning SCSI ID to 3-4
J
failure of E-1, E-6
jumpers, setting 3-4 features of, supported E-1
hot-pluggable, using E-1
L larger capacity, using, in array E-10
LEDs of E-2
LEDs, hard drive E-3
minimum number of, for RAID D-10
limitations on
moving E-9
ACU use 6-2
replacing E-7
controller port use 3-6
requirements of E-1
CPQONLIN use 6-2
status lights of E-2
drive movement E-9
types of, supported E-1
hard drive types supported E-1
upgrading capacity of E-10
number of logical drives allowed per
array 6-2
heel straps, using B-1
hot spare, defined D-5
ORCA use 6-2
hot-plug drive
load balancing, defined D-7
duplex drive cage option 3-4
logical drive capacity extension E-12
replacing E-7
logical drives
using E-1
compared to array D-3
HP website xi
defined D-2
enlarging (extending) E-12
I
failure of E-2, E-5
recovery of, options for E-5
Insight Manager
LVD (Low Voltage Differential) 1-8 drive failure detection with E-4
error counters in E-6
M installing
adapter board 8-8
Management Agents 7-2
array accelerator 8-1
maximum data preservation time 1-6
batteries 8-4
maximum number of
cache 8-1
hard drives for RAID 5 D-10
controller hardware 3-1
hard drives for RAID ADG D-10
controller, flowcharts for 2-1
memory
installing operating system 7-1
array accelerator 1-6
ECC SDRAM 1-6
Index-4 HP Smart Array 5300 Controller User Guide
HP CONFIDENTIAL
Writer: Kimberly Koch File Name: x-index.doc
Codename: Silver Hammer Part Number: 135606-006 Last Saved On: 3/13/03 2:04 PM