HP ROM-Based Setup Utility - Manual (Page 62)

PCIe Gen 3 Control (for select devices)
NOTE: This option is available on Gen8 servers with Intel processors.
This option controls the maximum supported speed of individual PCI Express links for embedded
devices and for devices installed in PCIe slots. Enabling PCIe Generation 3 Control permits the
device to fun at full speed.
NOTE: This option works in conjunction with the Maximum PCI Express Speed option. When
setting the PCIe Generation 3 Control to Enabled, the Maximum PCI Express Speed option must
be set to Maximum Supported. For more information about the Maximum PCI Express Speed
option, see
“Maximum PCI Express Speed” (page 63) .
After selecting the embedded device or PCIe slot to configure, the following options are presented:
•
Enabled (default)
•
Disabled
62 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)